Skip to main content

Load Battery from Pallet

Instructions to have the robot load battery from a pallet in the hallway into a rack.

note

_ The battery needs to be at least 9 inches off the ground (3 pallets high) for this job to occur._

  1. Place a battery in the hallway centered on the cell door with the pin plate facing the robot and between 12 and 14 inches from the opening.

  2. Select “System Health”

  3. Select “Rack #” where “#” is the rack where you would like to place the battery.

  4. Select the rack sleeve you would like to place the battery in from the Rack Array.

  5. Select “Populate Rack”